This Manual includes two parts as showed below:
1. John Deere 540D Skidder, 548D Grapple Skidder Operation and Tests
2. John Deere 540D Skidder, 548D Grapple Skidder Repair Technical Manual

This Technical Manual Includes Detailed Repair, Operation and Tests Information for the John Deere 540D Skidder, 548D Grapple Skidder. It contains deep information about maintaining, assembly, disassembly and servicing your John Deere 540D Skidder, 548D Grapple Skidder.

This manual contains information and data to this model. Has specs, diagrams, and actual real photo illustrations, color schemes. These technical manual is as good as it gets for Diagnosing, Repairing, and Maintenancing John Deere machinery.

Models Covered:
=========
John Deere 540D Skidder
John Deere 548D Grapple Skidder

Repair Technical Manual Contains:
=========
SECTION I – GENERAL INFORMATION
Group I – Safety Information
Group II – General Specifications
Group III – Torque Values
Group IV – Fuels and Lubricants
Group V – Inspection Procedure
SECTION 01 – WHEELS
Group 0110 – Powered Wheels and Fastenings
SECTION 02 – AXLES AND SUSPENSION SYSTEM
Group 0200 – Removal and Installation
Group 0210 – Differential or Bevel Drive
Group 0225 – Input Drive Shafts and U-Joints
Group 0250 – Axle Shafts, Bearings and Reduction Gears
Group 0260 – Hydraulic System
SECTION 03 – TRANSMISSION
Group 0300 – Removal and Installation
Group 0315 – Controls Linkage
Group 0350 – Gears, Shafts, Bearings and Power Shift Clutch
Group 0360 – Hydraulic System
SECTION 04 – ENGINE
Group 0400 – Removal and Installation
SECTION 05 – ENGINE AUXILIARY SYSTEMS
Group 0505 – Cold Weather Starting Aids
Group 0510 – Cooling Systems
Group 0515 – Speed Controls
Group 0520 – Intake System
Group 0530 – External Exhaust System
Group 0560 – External Fuel Supply Systems
SECTION 07 – DISCONNECT CLUTCH
Group 0715 – Controls Linkage
Group 0752 – Elements
SECTION 09 – STEERING SYSTEM
Group 0930 – Secondary Steering
Group 0960 – Hydraulic System
SECTION 10 – SERVICE BRAKES
Group 1011 – Active Elements
Group 1060 – Hydraulic System
SECTION 11 – PARK BRAKE
Group 1111 – Active Elements
Group 1115 – Controls Linkage
Group 1160 – Hydraulic System
SECTION 16 – ELECTRICAL SYSTEMS
Group 1671 – Batteries, Support and Cables
Group 1672 – Alternator, Regulator and Charging System Wiring
Group 1673 – Lighting System
Group 1674 – Wiring Harness and Switches
Group 1676 – Instruments and Indicators
SECTION 17 – FRAME, CHASSIS, OR SUPPORTING STRUCTURE
Group 1740 – Frame Installation
Group 1746 – Frame Bottom Guards
SECTION 18 – OPERATOR’S STATION
Group 1800 – Removal and Installation
Group 1810 – Operator Enclosure
Group 1821 – Seat and Seat Belt
Group 1830 – Heating and Air Conditioning
SECTION 19 – SHEET METAL AND STYLING
Group 1910 – Hood or Engine Enclosure
Group 1921 – Grille and Grille Housing
SECTION 20 – SAFETY, CONVENIENCE AND MISCELLANEOUS
Group 2004 – Horn and Warning Devices
SECTION 21 – MAIN HYDRAULIC SYSTEM
Group 2160 – Hydraulic System
SECTION 30 – WINCH
Group 3000 – Removal and Installation
Group 3050 – Drive and Clutches
Group 3060 – Hydraulic System
SECTION 32 – BULLDOZER (STACKING BLADE)
Group 3200 – Removal and Installation
Group 3215 – Controls Linkage
Group 3260 – Hydraulic System
SECTION 37 – ARCH OR BOOM
Group 3740 – Frames
SECTION 38 – GRAPPLE
Group 3803 – Grapple Mechanism
Group 3815 – Controls Linkage
Group 3840 – Frames
Group 3860 – Hydraulic System
SECTION 40 – PTO OR WINCH DRIVE
Group 4025 – Input Drive Shafts
SECTION 99 – DEALER FABRICATED TOOLS
Group 9900 – Dealer Fabricated Tools

Operation and Tests Technical Manual Contains:
=========
SECTION I – GENERAL INFORMATION
Group I – Safety Information
Group II – General Specifications
Group III – Torque Values
Group IV – Fuels and Lubricants
Group V – Inspection Procedure (not included)
SECTION 9005 – OPERATIONAL CHECKOUT PROCEDURE
Group 10 – Operational Checkout Procedure
SECTION 9010 – ENGINE OPERATION AND TESTS
Group 05 – Theory of Operation
Group 15 – Diagnostic Information
Group 20 – Adjustments
Group 25 – Test
SECTION 9015 – ELECTRICAL SYSTEM OPERATION AND TEST
Group 05 – Theory of Operation
Group 15 – Diagnostic Information
Group 25 – Tests
SECTION 9020 – POWER TRAIN OPERATION AND TEST
Group 05 – Theory of Operation
Group 15 – Diagnostic Information
Group 20 – Adjustments
Group 25 – Tests
SECTION 9025 – HYDRAULIC SYSTEM OPERATION AND TEST
Group 05 – Theory of Operation
Group 15 – Diagnostic Information
Group 25 – Tests
SECTION 9030 – MISCELLANEOUS COMPONENTS (WINCH) OPERATION AND TEST
Group 05 – Theory of Operation
Group 15 – Diagnostic Information
Group 20 – Adjustments
Group 25 – Test

==========

** Model Specification: John Deere 540D Skidder, 548D Grapple Skidder
** Language: English
** File Format: PDF
** Requirements: Adobe PDF Reader & WinZip
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

===========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.

After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.

Thanks for Visiting.