This is the COMPLETE Service Repair Manual for the Deutz-Fahr Agrofarm 85, Agrofarm 100 Tractor. It contains deep information about maintaining, assembly, disassembly and servicing your Deutz-Fahr Agrofarm 85, Agrofarm 100 Tractor.

Models Covered:
=========
Deutz-Fahr Agrofarm 85 Tractor
Deutz-Fahr Agrofarm 100 Tractor

This Manual contains information and data to this model. has specs, diagrams, and actual real photo illustrations, and schemes, which give you complete step by step operations on repair, Diagnosing, servicing, technical maintenance & troubleshooting procedures for your machine. this manual offers full information you need for repair your machine. the information in this manual will enable you to find trouble and to understand how to repair and maintain your machine without going into service. YOU CAN DO THE REPAIRS YOURSELF AND SAVE MONEY $$$

SERVICE REPAIR MANUAL CONTAINS:
=========
0 – INTRODUCTION
0.1 – Introduction
0.1.1 – Safety notes
0.1.2 – General safety rules
0.1.3 – Safety precautions for removal and refitting operations
0.1.4 – Lifting instructions
0.1.5 – Tightening torques
0.1.6 – Threadlockers, adhesives, sealants and lubricants
0.1.7 – Conversion factors
10 – TECHNICAL CHARACTERISTICS
10.1 – Transmission
10.1.1 – Transmission (Agrofarm 85)
10.1.2 – Transmission (Agrofarm 100)
10.1.3 – Rear. PTO
10.1.4 – 2 and 4-speed PTO and groundspeed PTO
10.2 – Front axle
10.2.1 – Front axle
10.3 – Hydraulic system
10.3.1 – Hydraulic system (Agrofarm 85)
10.3.2 – Hydraulic system (Agrofarm 100)
10.3.3 – Steering circuit pump – directional control valve circuit
10.3.4 – Power steering
10.3.5 – Auxiliary services directional control valve
10.3.6 – Hydraulic lift directional control valve (Agrofarm 85)
10.3.7 – Hydraulic lift directional control valve (Agrofarm 100)
10.3.8 – Braking system
10.3.9 – “Separate-Brake” valve
10.3.10 – Trailer braking valve
10.3.11 – Services solenoid valve assembly
20 – CALIBRATIONS AND ELECTRONIC DIAGNOSIS
20.1 – Diagnostic instrument
20.1.1 – All Round Tester
20.1.2 – Connecting the tester to the lift and engine control units
20.2 – Introduction to the tractor≈s electronic system
20.2.1 – Introduction to the tractor’s electronic system
20.3 – Putting the tractor into service
20.3.1 – Putting the tractor into service
20.4 – ECU alarms
20.4.1 – Instrument panel alarms
30 – METHOD
30.1 – Engine
30.1.1 – Engine – Separation from the transmission (B0.00.02)
30.1.2 – Engine (B0.00.01)
30.1.3 – Fan belt
30.1.4 – Tensioning the fan drive belt
30.1.5 – Alternator and fuel pump drive belt
30.1.6 – Alternator and fuel pump belt tensioning
30.2 – Engine accessories
30.2.1 – RADIATOR – Tractor without front PTO (C0.01.01)
30.2.2 – RADIATOR – Tractor with front PTO (C0.01.01)
30.2.3 – Changing the coolant and flushing the circuit
30.2.4 – Fuel tank (C0.03.01)
30.2.5 – Starter motor
30.2.6 – Exhaust pipe – Tractor with cab (C0.06.01)
30.3 – Transmission
30.3.1 – Parking brake
30.3.2 – Clutch plate
30.3.3 – Clutch thrust bearing
30.3.4 – Clutch housing – assembly (D0.02.01) (Agrofarm 85)
30.3.5 – Clutch housing – assembly (D0.02.01) (Agrofarm 100)
30.3.6 – Gearbox and shuttle assy. – complete unit (D0.09.03)
30.3.7 – Disassembly of gearbox and shuttle assy. – complete unit
30.3.8 – Gearbox support and gear selector rods
30.3.9 – Shuttle shaft
30.3.10 – Primary shaft
30.3.11 – Secondary shaft (Agrofarm 85)
30.3.12 – Secondary shaft (Agrofarm 100)
30.3.13 – PTO output shaft (4 speed version)
30.3.14 – PTO output shaft disassembly (4 speed version)
30.3.15 – PTO output shaft (2 speed version)
30.3.16 – PTO output shaft disassembly (2 speed versions)
30.3.17 – PTO clutch
30.3.18 – PTO clutch disassembly
30.3.19 – PTO final shaft (2-speed version)
30.3.20 – PTO final shaft (4-speed version)
30.3.21 – Groundspeed PTO final shaft
30.3.22 – Groundspeed PTO engagement device
30.3.23 – Range and differential assembly – complete assembly
30.3.24 – Rear pinion (Agrofarm 85)
30.3.25 – Rear pinion (Agrofarm 100)
30.3.26 – Four-wheel drive output shaft
30.3.27 – Differential – Bevel gear pair
30.3.28 – Range selector assembly
30.3.29 – Changing transmission oil (D0.00.01)
30.3.30 – Pump drive PTO – Outer gear
30.3.31 – Pump drive PTO – Inner gear
30.3.32 – 4WD engagement device
30.4 – Rear axle
30.4.1 – RH rear axle (E0.02.01) (Agrofarm 85)
30.4.2 – LH rear axle (E0.02.02) (Agrofarm 85)
30.4.3 – RH/LH rear axle (Agrofarm 85)
30.4.4 – RH rear axle (Agrofarm 100)
30.4.5 – Planet carrier assembly (Agrofarm 85)
30.4.6 – LH rear axle (Agrofarm 100)
30.4.7 – RH/LH rear axle (Agrofarm 100)
30.4.8 – Planet carrier assembly (Agrofarm 100)
30.4.9 – Rear differential
30.4.10 – Rear differential disassembly (Agrofarm 85)
30.4.11 – Rear differential disassembly (Agrofarm 100)
30.4.12 – Rear axle brake discs
30.4.13 – Rear axle brake piston (Agrofarm 85)
30.4.14 – Rear axle brake piston (Agrofarm 100)
30.5 – Front axle
30.5.1 – Front carrier (F0.01.01)
30.5.2 – 4WD front axle (F0.03.01)
30.5.3 – Adjusting the front axle end float
30.5.4 – Steering cylinders
30.5.5 – Steering cylinders disassembly
30.5.6 – Final drive reduction unit
30.5.7 – Final drive reduction unit disassembly
30.5.8 – Steering knuckle housing and halfshaft
30.5.9 – Steering knuckle housing and halfshaft
30.5.10 – Differential unit
30.5.11 – Differential disassembly
30.5.12 – Differential unit adjustment
30.5.13 – Bevel gear pair (Agrofarm 85)
30.5.14 – Bevel gear pair disassembly (Agrofarm 85)
30.5.15 – Differential disassembly (Agrofarm 85)
30.5.16 – Bevel gear pair (Agrofarm 100)
30.5.17 – Bevel gear pair disassembly (Agrofarm 100)
30.5.18 – Differential disassembly (Agrofarm 100)
30.5.19 – Front brake discs
30.5.20 – Front axle brake piston
30.5.21 – 4WD shaft
30.6 – Bodywork – Cab – Platform
30.6.1 – Cab (G0.03.01)
30.6.2 – Front hoods (G0.01.01)
30.6.3 – Fenders
30.6.4 – Front instrument panel (G0.06.04)
30.6.5 – Air conditioning
30.6.6 – Compressor
30.6.7 – Clutch master cylinder
30.6.8 – Clutch piston
30.6.9 – Clutch control circuit
30.6.10 – Brake master cylinders
30.6.11 – Control levers (Agrofarm 85)
30.6.12 – Control levers (Agrofarm 100)
30.7 – Hydraulic system
30.7.1 – Pump for hydraulic lift and auxiliary services
30.7.2 – Power steering (H0.02.01)
30.7.3 – Pressure relief valve setting:
30.7.4 – Power steering disassembly
30.7.5 – Power steering pump
30.7.6 – Rear 4-way auxiliary services control valve (Agrofarm 85)
30.7.7 – Rear 6-way auxiliary services control valve (Agrofarm 100)
30.7.8 – Braking circuit (Agrofarm 85)
30.7.9 – Braking circuit (Agrofarm 100)
30.7.10 – Services solenoid valve assembly
30.8 – Front PTO
30.8.1 – Front PTO
30.8.2 – PTO assembly.
30.8.3 – Pump assy
30.8.4 – Clutch-brake assembly
30.8.5 – Solenoid valve assy
30.9 – Front lift
30.9.1 – Front lift
30.9.2 – Lift cylinders
30.10 – Rear lift
30.10.1 – Lift – Complete assembly (R0.02.03) (Agrofarm 85)
30.10.2 – Lift disassembly – complete assembly (Agrofarm 85)
30.10.3 – Lift – Complete assembly (R0.02.03) (Agrofarm 100)
30.10.4 – Lift disassembly – Complete assembly (Agrofarm 100)
30.10.5 – Lift cylinder (Agrofarm 100)
30.10.6 – Bushes (Agrofarm 100)
30.10.7 – Hydraulic lift directional control valve (Agrofarm 85)
30.10.8 – Lift control valve disassembly (Agrofarm 85)
30.10.9 – Lift control valve disassembly (Agrofarm 100)
30.10.10 – Mechanical draft sensor (Agrofarm 85)
30.10.11 – Mechanical draft sensor disassembly (Agrofarm 85)
30.10.12 – Mechanical draft sensor (Agrofarm 100)
30.10.13 – Mechanical draft sensor disassembly (Agrofarm 100)
30.10.14 – 3-point linkage
30.11 – Wheels
30.11.1 – Front wheels (S0.01.01)
30.11.2 – Rear wheels (S0.02.01)
30.12 – Ballast – Towing hitches
30.12.1 – Towing hitch slide (Agrofarm 85)
30.12.2 – Towing hitch slide (Agrofarm 100)
40 – WIRING DIAGRAMS
40.1 – Introduction
40.1.1 – Structure of the unit
40.1.2 – Wiring and components index
40.2 – Components
40.2.1 – Components
40.3 – Systems
40.3.1 – Earthing points
40.3.2 – Starting and pre-heating
40.3.3 – Lights selector – Tractor with cab
40.3.4 – Lights selector – Tractor with platform
40.3.5 – Diagnostic accessories – Tractor with standard cab
40.3.6 – Diagnostic accessories – Tractor with high-visibility cab
40.3.7 – Instrument panel
40.3.8 – Worklights – Tractor with standard cab
40.3.9 – Wipers – Tractor with standard cab
40.3.10 – Heating system – Tractor with standard cab
40.3.11 – Air conditioning system – Tractor with standard cab
40.3.12 – Worklights – Tractor with high-visibility cab
40.3.13 – Wipers – Tractor with high-visibility cab
40.3.14 – Heating system – Tractor with high-visibility cab
40.3.15 – Air conditioning system – Tractor with high-visibility cab
40.3.16 – Transmission
40.3.17 – PTO
40.3.18 – Brakes
40.3.19 – CAN BUS ELECTRONIC SYSTEM
40.4 – Wiring looms
40.4.1 – Hood lights wiring – 0.014.8107.4/20
40.4.2 – Hood lights wiring connector positions
40.4.3 – Engine wiring – version with front battery – 0.014.8629.4/20
40.4.4 – Engine wiring connector positions – version with front battery
40.4.5 – Engine wiring – version with lateral battery – 0.015.1597.4/10
40.4.6 – Engine wiring connector positions – version with lateral battery
40.4.7 – Battery wiring loom – 0.014.8806.4/20
40.4.8 – Battery wiring connector positions
40.4.9 – Preheating wiring loom – 0.014.9195.4/20
40.4.10 – Pre-heating wiring connector positions
40.4.11 – Power supply wiring – 0.015.1983.4/10
40.4.12 – Power supply wiring connector positions
40.4.13 – Instrument panel wiring – 0.014.8628.4/20
40.4.14 – Instrument panel wiring connector positions
40.4.15 – RH drivetrain wiring – 0.014.8630.4/20
40.4.16 – RH drivetrain wiring connector positions
40.4.17 – LH drivetrain wiring – 0.014.9193.4/20
40.4.18 – LH drivetrain wiring connector positions
40.4.19 – Power supply wiring – Tractor with standard cab – 0.014.9375.4/20
40.4.20 – Power supply wiring connector positions – Tractor with standard cab
40.4.21 – Roof line wiring – Tractor with standard cab – 0.009.7850.4/50
40.4.22 – Roof line wiring connector positions – Tractor with standard cab
40.4.23 – Heating wiring – Tractor with standard cab – 0.010.2147.2
40.4.24 – Heating system wiring connector positions – Tractor with standard cab
40.4.25 – Air conditioning wiring – Tractor with standard cab – 0.010.2153.2
40.4.26 – Air conditioner wiring connector positions – Tractor with standard cab
40.4.27 – Air conditioning cooler fan wiring – Tractor with standard cab – 0.009.7853.3/20
40.4.28 – Air conditioner exchanger fan wiring connector positions – Tractor with standard cab
40.4.29 – Front-rear worklights wiring – Tractor with standard cab – 0.009.7851.4/50
40.4.30 – Supplementary worklights wiring connector positions – Tractor with standard cab
40.4.31 – Supplementary worklights wiring – Tractor with standard cab – 0.015.1435.4/10
40.4.32 – Supplementary worklights wiring connector positions – Tractor with standard cab
40.4.33 – Windscreen wiper wiring – Tractor with standard cab – 0.010.4516.3
40.4.34 – Windscreen wiper connector positions wiring – Tractor with standard cab
40.4.35 – Loudspeaker wiring – Tractor with standard cab – 0.011.0729.4/10
40.4.36 – Loudspeaker wiring connector positions – Tractor with standard cab
40.4.37 – Cab power supply wiring – Tractor with high-visibility cab – 0.014.9376.4/10
40.4.38 – Cab power supply wiring connector positions – Tractor with high-visibility cab
40.4.39 – Roof line wiring – Tractor with high-visibility cab – 0.011.3606.4/50
40.4.40 – Roof line wiring connector positions – Tractor with high-visibility cab
40.4.41 – Heating system wiring – Tractor with high-visibility cab – 0.010.2554.2
40.4.42 – Heating system wiring connector positions – Tractor with high-visibility cab
40.4.43 – Air conditioning wiring – Tractor with high-visibility cab – 0.010.2560.0
40.4.44 – Air conditioner wiring connector positions – Tractor with high-visibility cab
40.4.45 – Air conditioning cooler fan wiring – Tractor with high-visibility cab – 0.011.3610.3/20
40.4.46 – Air conditioning exchanger fan wiring connector positions – Tractor with high-visibility cab
40.4.47 – Front-rear worklights wiring – Tractor with high-visibility cab – 0.011.3595.3/10
40.4.48 – Worklights wiring connector positions – Tractor with high-visibility cab
40.4.49 – Supplementary worklights wiring – Tractor with high-visibility cab – 0.015.1437.4/10
40.4.50 – Supplementary worklights wiring connector positions – Tractor with high-visibility cab
40.4.51 – Windscreen wiper wiring – Tractor with high-visibility cab – 0.011.3597.3
40.4.52 – Windscreen wiper wiring connector positions – Tractor with high-visibility cab
40.4.53 – Loudspeaker, radio, rear wiper, flashing light and clock wiring – Tractor with high visibility cab – 0.011.3596.3/40
40.4.54 – Loudspeaker, radio, rear wiper, flashing light and clock wiring connector positions – Tractor with high-visibility cab
40.4.55 – Wiring for front lights – Tractor with cab – 0.010.8189.3/40
40.4.56 – Front lights wiring connector positions – Tractor with cab
40.4.57 – Wiring for lower front lights – Tractor with cab – 0441.1923.4
40.4.58 – Lower front lights wiring connector positions – Tractor with cab
40.4.59 – Wiring for front lights – Tractor with platform – 0.015.3094.4
40.4.60 – Front lights wiring connector positions – Tractor with platform
40.4.61 – Worklights wiring – Tractor with platform – 0.014.9281.4
40.4.62 – Worklights wiring connector positions – Tractor with platform
40.4.63 – Rotating beacon wiring – 0.012.9909.4
40.4.64 – Position of rotary beacon wiring connectors
40.4.65 – Trailer hydraulic braking wiring – 0.014.1645.4/10
40.4.66 – Trailer hydraulic braking wiring connector positions

=========

** Model Specification: Deutz-Fahr Agrofarm 85, Agrofarm 100 Tractor
** Language: English
** Total Pages: 715
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

=========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.

After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.

Thanks for Visiting.